Hitching System- Garden Cart
The AGCH Garden Cart Handle is a hitching system part that fits onto Equinox frames. It is an array of tubular aluminum parts that are adjustible in length and height that make it convenient for the user to push or pull a cart by hand. It may be a stand alone cart or a conversion to or from a bicycle trailer or sled.
The handle is composed of five sections of 6063 aluminum tube with an .058" wall thickness. A five foot section of 1" od tube is bent into a "U" shape and fitted with 5/16" stainless steel snap buttons on the ends. Two 26.5" x 1" aluminum tube sections are bent about 45 degrees at about 1/3 the length of the tube. These are filled with a stiffening resin and and fitted with 5/16" stainless steel snap buttons on both ends. Two 13" x 1.125"od adjusting sleeves connect the upper and lower elements and are drilled to accept the adjoining snap buttons. An additional PT29 clamp system is provided .
The AGCH garden cart handle will fit the default width of the Equinox frame at 20.5" on center. The frame requires two PT29 clamp systems to be fit onto the Equinox frame to accept the handle