Photo Gallery

Transportation- Third Wheel Expedition handle in rear-full Expedition handle in front-full Pet carrierWithSunScreen-Full ExpeditionTrailerWithCoolerStrapsFrontView-Full ExpeditionTrailerWheelBoomOnly-Full animal shaftsTrekkingOnly-Full animal ShaftsTrekkingConnection-Full ExpeditionTrailerRainCoverOpenSolidFloornomex-Full Animal shaftsFrontViewWithTrekking-Full ExpeditionTrailerCoolerHandleSideView-Full ExpeditionTrailerCoolerHandleFontView-Full
$199.89

3- Wheel expedition kit- urethane tire

 Description:

The PW27 is an assembly of a fork, mount , mount support and 16" nylon wheel and a flat free urethane tire. This is a third wheel for the frame when it is being used as an expedition trailer or a push cart or animal pulled cart.  The PC10 wheel drop out set is the same as for all wheeled versions of the Equinox trailer system

Technical Specifications:

The wheel is a16"x 1.75"  nylon wheel with flange bearings.  A 7/16" x 4 1/2" bolt serves as an axle, connecting two 7/8" formed aluminum tubes which have been filled with a resin.  The are fitted into a machined aluminum block which is bolted to to a machined aluminum bar.  The bar is machined to accept 1 1/4" x 1/8" thick  and 1" x 1/16" thick bronze thrust washers  This bar is attached to an aluminum casting with a 3/8" x 1 1/2" clevis pin.  This casting is bolted to the frame and to a 7/8" tube that is in turn fitted into two aluminum mounts that are bolted to the corner posts of the frame.

The wheel dropouts are cast aluminum 

Dependencies:

Fits onto an Equinox frame.