Photo Gallery

Transportation- Third Wheel Expedition handle in rear-full Expedition handle in front-full Pet carrierWithSunScreen-Full ExpeditionTrailerWithCoolerStrapsFrontView-Full ExpeditionTrailerWheelBoomOnly-Full animal shaftsTrekkingOnly-Full animal ShaftsTrekkingConnection-Full ExpeditionTrailerRainCoverOpenSolidFloornomex-Full Animal shaftsFrontViewWithTrekking-Full ExpeditionTrailerCoolerHandleSideView-Full ExpeditionTrailerCoolerHandleFontView-Full

3-Wheel Expedition Kit-pneumatic tire


The PW25 is an assembly of a fork, mount , mount support and 16" nylon wheel and a pneumatic tire. This is a third wheel for the frame when it is being used as an expedition trailer or a push cart or animal pulled cart.  The PC10 wheel drop out set is the same as for all wheeled versions of the Equinox trailer system

Technical Specifications:

The wheel is a16"x 1.75"  nylon wheel with flange bearings.  A 7/16" x 4 1/2" bolt serves as an axle, connecting two 7/8" formed aluminum tubes which have been filled with a resin.  The are fitted into a machined aluminum block which is bolted to to a machined aluminum bar.  This bar is attached to an aluminum casting with a 3/8" x 1 1/2" clevis pin.  This casting is bolted to the frame and to a 7/8" tube that is in turn fitted into two aluminum mounts that are bolted to the corner posts of the frame.

The wheel dropouts are cast aluminum 


Fits onto an Equinox frame.