Attaching the Roll Bar

 

The roll bar is passed through the sleeve that is sewn into the top of the child seat. The roll bar is inserted between the side rails. Select the upright or slightly reclined position by choosing the forward or rear holes in the top of the side rail. A more fully reclined position may be chosen by using the holes on the back, vertical part of the side rail. Secure the roll bar by placing the hairpin cotter, that is sewn to the top of the child seat, through the pin holes in the pins that protrude from the end of the roll bar. The roll bar is longer than the trailer frame is wide. This will cause the side rails to be forced out at the top. This feature is to allow more shoulder room at the top.